1 skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 200193 rev. d ? skyworks proprietary information ? products and product information are subject to change without notice. ? december 19, 2008 AS213-92, AS213-92lf: phemt gaas ic spdt switch 0.1C3 ghz data sheet features l low insertion loss (0.4 db @ 2.4 ghz) l isolation 22 db @ 2.4 ghz l low dc power consumption l phemt process l operates with 1.8 v control voltage l available lead (pb)-free and rohs-compliant msl-1 @ 260 c per jedec j-std-020 applications l t/r switch in wlans, bluetooth and medium-power telecommunication applications description the AS213-92 is a medium-power ic fet spdt switch in a low- cost miniature sc-70 6-lead plastic package. the AS213-92 features low insertion loss and positive voltage operation with very low dc power consumption. this general-purpose switch can be used in a variety of telecommunications applications. parameter (1) frequency min. typ. max. unit insertion loss (2) 0.1C1.0 ghz 0.3 0.5 db 1.0C2.0 ghz 0.4 0.6 db 2.0C3.0 ghz 0.5 0.7 db isolation 0.1C1.0 ghz 24 27 db 1.0C2.0 ghz 20 23 db 2.0C3.0 ghz 16 19 db vswr (3) 0.1C1.0 ghz 1.3:1 1.0C3.0 ghz 1.4:1 electrical specifications at 25 c (0, 3 v) 1. all measurements made in a 50 w system, unless otherwise specified. 2. insertion loss changes by 0.003 db/c. 3. insertion loss state. pin out 1 2 3 6 5 4 j 1 gnd c bl c bl c bl j 2 j 3 v 1 v 2 dc blocking capacitors (c bl ) must be supplied externally for positive voltage operation. c bl = 100 pf for operation >500 mhz. skyworks offers lead (pb)-free, rohs (restriction of hazardous substances)-compliant packaging. new
skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com december 19, 2008 ? skyworks proprietary information ? products and product information are subject to change without notice. ? 200193 rev. d data sheet ? AS213-92, AS213-92lf 2 simulated performance data (0, 3 v) insertion loss vs. frequenc y f requenc y (ghz) insertion loss (db) -2.00 -1.75 -1.50 -1.25 -1.00 -0.75 -0.50 -0.25 0 0 0.5 1.0 1.5 2.0 2.5 3.0 vswr vs. frequenc y f requenc y (ghz) vswr 0 0.5 1.0 1.5 2.0 2.5 3.0 1.0 1.1 1.2 1.3 1.4 1.5 isolation vs. frequenc y f requenc y (ghz) isolation (db) 0 0.5 1.0 1.5 2.0 2.5 3.0 -50 -45 -40 -35 -30 -25 -20 -15 -10 parameter condition frequency min. typ. max. unit switching characteristics rise, fall 10/90% or 90/10% rf 10 ns on, off 50% ctl to 90/10% rf 20 ns video feedthru t rise = 1 ns, bw = 500 mhz 25 mv input power for 1 db compression 0/1.8 v 0.5C3 ghz 20 dbm 0/3 v 0.5C3 ghz 27 dbm intermodulation intercept point (ip3) for two-tone input power 5 dbm 0/3 v 0.5C3 ghz 40 dbm thermal resistance 25 c/w control voltages v low = 0 to 0.2 v @ 20 a max. v high = 1.8 v @ 100 a max. to 5 v @ 200 m a max. operating characteristics at 25 c (0, 3 v)
data sheet ? AS213-92, AS213-92lf skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 200193 rev. d ? skyworks proprietary information ? products and product information are subject to change without notice. ? december 19, 2008 3 v 1 v 2 j 1 Cj 2 j 1 Cj 3 0 v h i g h isolation insertion loss v high 0 insertion loss isolation any state other than described in the truth table will put the device in an undefined state. an undefined state will not damage the device. v high = 1.8 to 5 v. 0.079 (2.00 mm) 0.008 (0.20 mm) 0.049 (1.25 mm) 0.004 (0.10 mm) 0.008 (0.20 mm) 0.004 (0.10 mm) 0.087 (2.20 mm) 0.008 (0.20 mm) 0.035 (0.90 mm) 0.004 (0.10 mm) 0.002 (0.005 mm) 0.002 (0.005 mm) 0.037 (0.95 mm) 0.006 (0.15 mm) 0.010 (0.25 mm) 0.006 (0.15 mm) 0.0055 (0.14 mm) 0.0015 (0.04 mm) 0.0256 (0.65 mm) bsc 0.009 (0.23 mm) ref pin 1 indicator characteristic value rf input power 2 w max. for f > 500 mhz 500 mw for f < 500 mhz v ctl = 0/8 v supply voltage 8 v control voltage -0.2 v, +8 v operating temperature -40 c to +85 c storage temperature -65 c to +150 c performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the absolute maximum specifications. exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. caution: although this device is designed to be as robust as possible, esd (electrostatic discharge) can damage this device. this device must be protected at all times from esd. static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. industry-standard esd precautions must be employed at all times. recommended solder reflow profiles refer to the ?recommended solder reflow profile ? application note . t ape and reel information refer to the ?discrete devices and ic switch/attenuators ta pe and reel p ackage orientation? a pplication note.
skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com december 19, 2008 ? skyworks proprietary information ? products and product information are subject to change without notice. ? 200193 rev. d data sheet ? AS213-92, AS213-92lf 4 copyright ? 2002, 2003, 2004, 2005, 2006, 2007, 2008, skyworks solutions, inc. all rights reserv ed. information in this document is provided in connection with skyworks solutions, inc. (skyworks) p roducts or services. these materials, including the information contained herein, are provided by skyworks as a service to its customers and may be used for informational purposes only by the c ustomer. skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. skyworks may change its documentation, products, services, specific ations or product descriptions at any time, without notice. skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incomp atibilities, or other difficulties arising from any future changes. no license, whether express, implied, by estoppel or otherwise, is granted to any intellectual propert y rights by this document. skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of skyworks pr oducts, information or materials, except as may be provided in skyworks terms and conditions of sale. the materials, products and information are provided as is without warranty of any kind, whether express, implied, statutory, or otherwise, including fitness for a particular purpose or use, merchantability, performance, quality or non-infringement of any intellectual property right; all such warranties are hereby expressly disclaimed. skyworks does not warrant the accuracy or completeness of the information, text, graphics or other items contained within these materials. skyworks shall not be liable for any damages, including but not limited to any special, indirec t, incidental, statutory, or consequential damages, including without limitation, lost revenues or lost profits that may result from the use of the materials or information, whether or not the recipient of materials has been advised of the possibility of such damage. skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or o ther equipment in which the failure of the skyworks products could lead to personal injury, death, physical or environmental damage. skyworks customers using or selling skyworks products f or use in such applications do so at their own risk and agree to fully indemnify skyworks for any damages resulting from such improper use or sale. customers are responsible for their products and applications using skyworks products, which may d eviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. customers should include design and operating safeguards to minimize these and other risks. skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the u se of skyworks products outside of stated published specifications or parameters. skyworks, the skyworks symbol, and breakthrough simplicity are trademarks or registered trademarks of skyworks solutions, inc., in the united states and other countries. third-party brand s and names are for identification purposes only, and are the property of their respective owners. additional information, including relevant terms and conditions, posted at www.skyworksinc.c om, are incorporated by reference.
|
